Difference between revisions of "Mesecons guidelines"

Revision as of 14:06, 12 October 2019

just... why?

Overview

This page should help to keep the mesecons performant and efficient so that everybody can play with them

On/Off switches

Please add On/Off switches to your machinery and toggle them on only if you use them

Intervals

Use intervals of 5 seconds or more, depending on how much is connected to the wire
Shorter intervals are ok if the executed action is not that heavy (for example: a simple light or signal)

Size/Length limits

Try to limit the amount of machines triggered by LuaC's or blinkys

This should work fine with a 3 to 5 seconds interval

Luacontroller with on/off switch

The following program generates a signal-change every 5 seconds. It can be toggled with a switch on port A and generates the signal on port B

if event.type == "program" or event.type == "interrupt" then
 interrupt(5)
 if not pin.a then
  return
 end
 port.b = not port.b
end

Debugging

Use the Monitoring page to see how the mesecons are working right now: https://monitoring.minetest.land/d/LjYzPumWz/mesecons?orgId=1&refresh=5s
You can check out the lag-stats, if the average value is above ~750 milliseconds there is something wrong...

Example of heavy mesecons activity

@@ Line 13: / Line 13: @@
 ==== On/Off switches ====
-TODO
+* Please add On/Off switches to your machinery and toggle them on only if you use them
 ==== Intervals ====
-TODO
+* Use intervals of 5 seconds or more, depending on how much is connected to the wire
+* Shorter intervals are ok if the executed action is not that heavy (for example: a simple light or signal)
+==== Size/Length limits ====
-[[Category:Stub]]
+* Try to limit the amount of machines triggered by LuaC's or blinkys
+{| class="wikitable" style="float:right;"
+!colspan="10"| This should work fine with a 3 to 5 seconds interval
+|-
+!colspan="10"|[[File:monitoring-mesecons-2.png|400px]]
+|}
+==== Luacontroller with on/off switch ====
+The following program generates a signal-change every 5 seconds.
+It can be toggled with a switch on '''port A''' and generates the signal on '''port B'''
+<syntaxhighlight lang="Lua">
+if event.type == "program" or event.type == "interrupt" then
+ interrupt(5)
+ if not pin.a then
+  return
+ end
+ port.b = not port.b
+end
+</syntaxhighlight>
+==== Debugging ====
+* Use the Monitoring page to see how the mesecons are working right now: https://monitoring.minetest.land/d/LjYzPumWz/mesecons?orgId=1&refresh=5s
+* You can check out the lag-stats, if the average value is above ~750 milliseconds there is something wrong...
+{| class="wikitable" style="float:right;"
+!colspan="10"| Example of heavy mesecons activity
+|-
+!colspan="10"|[[File:monitoring-mesecons-1.png|400px]]
+|}
+[[Category:Mesecons]]