Jumpdrive Script by GamePlayer
Jump to navigation
Jump to search
Jumpdrive Script
--[[
##################################
# Copyright C 2022 GamePlayer #
# AERO Kianit License 1.0 #
##################################
--]]
--[[
This script is for Luacontroller in Minetest game.
It's controlling Jumpdrive block by Terminal (LCD + Keyboard).
It requires:
- Jumpdrive on channel 'jumpdrive' (+ power);
- Luacontroller;
- Digilines;
- LCD (or something similar) on channel 'LCD';
- Keyboard (or something similar) on channel 'kb'.
It allows:
- Saving home location;
- Teleport you and your spaceship / home all around the world;
- Search for free space (useful for finding asteroids).
Type 'help' in Terminal to see available commands.
Script is available on Gitea:
https://xdvuazhmpidi4euufr2vxbx4ddw2es2woaavx7dhdmo5zs4wv5eveqad.onion/gitea/GamePlayer-Pandorabox.io/Pandorabox-Jumpdrive
--]]
local function jd_save() -- send save message to Jumpdrive
digiline_send('jumpdrive', {command = 'save'})
end
local function jd_set(x, y, z) -- setup TARGET position in Jumpdrive
digiline_send('jumpdrive', {command = 'set', key = 'x', value = x})
digiline_send('jumpdrive', {command = 'save'})
digiline_send('jumpdrive', {command = 'set', key = 'y', value = y})
digiline_send('jumpdrive', {command = 'save'})
digiline_send('jumpdrive', {command = 'set', key = 'z', value = z})
digiline_send('jumpdrive', {command = 'save'})
end
local function jd_jump() -- send JUMP signal
digiline_send('jumpdrive', {command = 'jump'})
end
local function jd_show() -- send check signal
digiline_send('jumpdrive', {command = 'show'})
end
if not mem.scan_state then -- Setup scan variables
mem.default_y = 6000
mem.scan_state = '0'
end
if mem.scanf == '1' then -- Scan process
if mem.startscan == '1' then
mem.scany = mem.default_y
mem.startscan = '0'
mem.progress = 0
end
mem.progress = mem.progress + 1
digiline_send('LCD', mem.progress..' on 80 - '..mem.y..' Y')
jd_set(mem.x, mem.scany, mem.z)
jd_show()
mem.scanf = '2'
if mem.progress == 80 then
digiline_send('LCD', 'Asteroid not found.')
mem.scanf = '0'
end
end
if event.type == 'digiline' then
-- Event process (in YandereDev style, lol)
if event.channel == 'kb' then
if mem.jdset == '3' then -- Set Z Position
mem.z = event.msg
mem.jdset = '0'
digiline_send('jumpdrive', {command = 'set', key = 'z', value = event.msg})
jd_save()
elseif mem.jdset == '2' then -- Set Y Position
mem.y = event.msg
mem.jdset = '3'
digiline_send('LCD', 'Z:')
digiline_send('jumpdrive', {command = 'set', key = 'y', value = event.msg})
jd_save()
elseif mem.jdset == '1' then -- Set X Position
mem.x = event.msg
mem.jdset = '2'
digiline_send('LCD', 'Y:')
digiline_send('jumpdrive', {command = 'set', key = 'x', value = event.msg})
jd_save()
elseif mem.setdefa == '1' then -- Set Y Position
mem.setdefa = '0'
mem.y = event.msg
digiline_send('jumpdrive', {command = 'set', key = 'y', value = mem.y})
digiline_send('jumpdrive', {command = 'save'})
elseif mem.scan_state == '1' then -- Set Y position
mem.default_y = event.msg
mem.scan_state = '2'
elseif event.msg == 'set' then -- SET
mem.jdset = '1'
digiline_send('LCD', 'Set coordinates (X Y Z):')
digiline_send('LCD', 'X:')
elseif event.msg == 'jump' then -- JUMP
digiline_send('LCD', 'Jumping...')
jd_jump()
elseif event.msg == 'scan' then -- SCAN
digiline_send('LCD', 'Scanning...')
mem.startscan = '1'
mem.scanf = '1'
elseif event.msg == 'stop' then -- STOP
mem.scanf = '0'
digiline_send('LCD', 'Scan canceled!')
elseif event.msg == 'sethome' then -- SETHOME
mem.homex = mem.x
mem.homey = mem.y
mem.homez = mem.z
digiline_send('LCD','Done.')
elseif event.msg == 'home' then -- HOME
mem.x = mem.homex
mem.y = mem.homey
mem.z = mem.homez
jd_set(mem.x, mem.y, mem.z)
digiline_send('LCD','Teleportation...')
jd_jump()
elseif event.msg == 'coords' then -- COORDS
digiline_send('LCD','JD >> Coords:')
digiline_send('LCD','X: '..mem.x)
digiline_send('LCD','Y: '..mem.y)
digiline_send('LCD','Z: '..mem.z)
elseif event.msg == 'setscan' then -- SETSCAN
digiline_send('LCD','JD >> Set scan point:')
mem.scan_state = '1'
elseif evnet.msg == 'setY' then -- setY
digiline_send('LCD', 'JD >> Y: ')
mem.setdefa = '1'
elseif event.msg == 'help' or event.msg == 'help 1' then -- HELP <page>
digiline_send('LCD', 'Available commands:')
digiline_send('LCD', 'help <page>;')
digiline_send('LCD', 'jump | Send jump signal.')
digiline_send('LCD', 'Page 1 of 4.')
elseif event.msg == 'help 2' then
digiline_send('LCD', 'set | Set target position;')
digiline_send('LCD', 'scan | Scan for free space.')
digiline_send('LCD', 'Page 2 of 4.')
elseif event.msg == 'help 3' then
digiline_send('LCD', 'stop | Stop scan;')
digiline_send('LCD', 'coords | Show coords.')
digiline_send('LCD', 'Page 3 of 4.')
elseif event.msg == 'help 4' then
digiline_send('LCD', 'setscan | Set scan point;')
digiline_send('LCD', 'setY | Set scan Y position.')
digiline_send('LCD', 'Page 4 of 4.')
end
elseif event.channel == 'jumpdrive' then
if mem.scanf == '2' then
if event.msg.success then
digiline_send('LCD', 'Asteroid detected!')
mem.scanf = '0'
digiline_send('LCD', 'Y: '..mem.scany)
digiline_send('jumpdrive', {command = 'set', key = 'y', value = mem.scany})
digiline_send('jumpdrive', {command = 'save'})
else
mem.scany = mem.scany + 25
mem.y = mem.scany
mem.scanf = '1'
end
elseif event.msg.success then
digiline_send('LCD', 'Success.')
end
end
end
interrupt(2)